An interesting addition, this ROM has the following features:
a) adds a 480 pin and 960 pin (per line) graphics mode,
b) adds a TRS-80 mode where the block graphics characters (normally characters 160 to 255) are shifted to become characters 128 to 223
c) adds the ability to redefine the following control codes used by the printer to improve compatability with some hardware:
We have implemented these into the Epson emulator (enabled by setting /root/config/emulation to Epson+Graftrax80) and are looking for testers.1/8" Line Feed (ESC 0)
7/72" Line Feed (ESC 1)
1/6" Line Feed (ESC 2)
n/216" Line Feed (ESC 3)
Italics On (ESC 4)
Italics Off (ESC 5)
Ignore Paper Out (ESC 8)
Cancel Ingore Paper Out (ESC 9)
TRS-80 Mode On (ESC : )
TRS-80 Mode Off (ESC ; )
Home print head (ESC <)
Clear MSB (ESC =)
Set MSB (ESC >)
Redefine ESC codes (ESC ?)
Reset Printer (ESC @)
Line feed by dots (ESC A)
Vertical tab set (ESC B)
Set Form Length (ESC C)
Horizontal tab set (ESC D)
Emphasized print on (ESC E)
Emphasized print off (ESC F)
Double strike on (ESC G)
Double strike off (ESC H)
Fast 960 graphics (ESC J)
480 graphics (ESC K)
960 graphics (ESC L)
Set condensed mode (ESC P)
Cancel condensed mode (ESC Q)
Set expanded mode (ESC S)
Cancel expanded mode (ESC T)