RetroPrinter Support

Hi guys,

I have recently purchased the v3 Retro-Printer Module for my Amstrad CPC 6128 and I am finding it difficult to find the appropriate lead to connect the module to the computer.

Can you suggest where I can find a suitable lead?

Cheers

Newbie

It is unfortunate that the Amstrad CPC (like the ZX Spectrum+2 and +3) used an odd edge connector for adding a printer cable.

However, there seems to be someone still making these - https://www.simulant.uk/shop/retro-comp ... _N1nvmyRxw

No idea if that will work on the Schneider version of the CPC as I know they changed some of the port connectors!

Sorry - I managed to delete your reply, it was:

Hi,

I actually bought the cable in the link and one end fits the Amstrad CPC6128 ok with extra pins, but the other end is a 50 pin and the Retroprinter needs a 36 pin end.

Is there any lead or adaptor that can convert this 50 pin end to a 36 pin as required by the Retroprinter?

Cheers

Hmm - you are correct that is NOT the right cable.

I am sorry - I don't know where you would find a standard centronics cable for an Amstrad CPC - I will ask Zaxon on our sister site, SellMyRetro.com - he may be able to make some of these.

That would be great if you could do that.

Many thanks

I have asked, but he is not interested at the moment - there is simply no profit in it for him as the parts are so expensive. I have also asked on the CPC group on Facebook.

That's great. Thanks for doing that.

Hi there,

Any response from the CPC Facebook group ?

Newbie

Someone has offered to make some if there is enough interest - I don't think 1 person needing one is enough at the moment!

Many thanks for checking. Are the leads easy to make?

I found this lead on ebay, its got a few more pins than a normal Centronics (36 pins).

https://www.ebay.co.uk/itm/Amstrad-to-S ... 3463843243

Could this work as well ?